Wuhan Future Intepower Co., Ltd.
Do Excellent, Be Honest, Supply Best.
Add to Cart
Products assembly drawing and size refers
| NO | Part Name | Description | quantity |
| 1 | Cell | 18650-22500mAh | 2 |
| 2 | BMS | Charging 3A,Discharging 3A | 1 |
| 3 | Wiring | 100mm length of 1007/22# Red&Black wiring | 1 |
| 4 | Connector | XH 2.54 | 1 |
| Item | Specifications |
| Typical Capacity | 4100mAh (0.2C discharge after full charge) |
| Minimum Capacity | 2000mAh (0.2C discharge after full charge) |
| Nominal Voltage | 7.4V |
| Charge Voltage | 8.4V±0.05V |
| Impedance | 220mΩ(Max) |
| Charging Mode | C.C/C.V. |
| Standard Charging | Charging Current 450mAh |
| Fast Charging | Charging Current 1125mAh |
| Standard Charging Time | 6.5Hours |
| Fast Charging Time | 2.6Hours |
| Weight | Approx100.0g |
| Operating Temperature | Charging: 0℃~45℃ Discharge:-10℃~+60℃ |
| Storage Temperature | -10℃-40℃ Recommend 25±5℃ Storage capacity should be 40%~50% full charge capacity |
| Storage Humidity | ≤75% RH |
| Appearance | Without scratch, distortion, contamination and leakage |
| Overcharge Voltage | 4.25±0.05V(Single Cell Monitoring) |
| Over Discharge Cut Off Voltage | 2.8V±0.1V(Single Cell Monitoring) |
| Over Current | 5-9A)Instantaneous Current) |
| Short Circuit | External Short-circuit Protection)Self-recovery after Disconnection) |
| Operating Consumption Current | 10uA(MAX) |
| NTC Resistor | / |
| ESD Test | ±4KV |
| Discharge Current | ≤2A |
| The factory Voltage | 3.6-4.0V |
Outline Drawing
Application
Toys, Power Tools, Home Appliances, Camera,Consumer Electronics,POS machine,Router/Switch,Remote Control and so on.
Battery Quality:
1. Cells - Grade A cells to make sure batteries in high and full capacity.
2. Protection - Dual IC chips, that can anti-over charge, anti-over discharge, anti-over current, anti-short circuit.
3. Compose Type : Injection Technology to make battery more stable.
4. Long life cycle.